I been monitor the a few newly deploy Access point where VSZ-E is showing high latency on 2.4Ghz and 5 Ghz, where number of user are only 5 or less. It been flagged and Latency have not recover since deployment
Do anyone have this issue?
Any idea is this a bug or what is the possible cause of the latency.
Thanks for Answering in advance.
As far as I remember, latency is montoring Wi-Fi protocol ACK packets and mostly it referres to CA network occupancy, i.e network is busy or packets have disappeared due to radio propagation and retransmitted.
I will always start with controller model, firmware version, number of APs connected to it and how close APs are installed.
Another major point is, AP stats flagging is set to default, so default settings may not be ideal for all type of installations, for example dense environments.
Change the flag sensitivity (set to low) and threshold (to high) depending upon how close APs are installed and how fair this environment is.
For more about the feature, refer below article which will give you some additional information.