RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
06-17-2023 04:09 AM
We have successfully set up a distinct SSID called "XXX" on the ZD 3000 in the WLAN to establish a connection with VLAN 10, and it has been functioning smoothly.
However, we have recently observed that clients are unable to obtain an IP address upon connecting to this particular SSID.
What could potentially be causing this issue?
06-19-2023 02:08 AM
Hi @stanley_hotel
On the SSID settings, do you have the right VLAN set and allowed on the switch as per the DHCP server setup?
If yes, then we need to see if the DHCP packets are sent on the AP eth or dropped on the network side.
