cancel
Showing results for 
Search instead for 
Did you mean: 

Can I create 2-node vSZ cluster setup with each node having different VLANs.

pamuditha_abeys
Contributor
I am creating 2 node vSZ cluster. Nodes will be put in two different sites. As per network architecture, VLANs are not span between sites.
So in my setup management and control will have different VLAN IDs and different IP subnets while cluster interface will be extended through pseudo-wire.
Is this setup possible to have with automatic failover and all other vSZ functionalities?
Latency between sites 5ms.
BW 10G

Thanks
8 REPLIES 8

raazuko
New Contributor III
HI pamuditha,Did you get past this?I am also facing the same here 😞

pamuditha_abeys
Contributor
Hi Raju,
I have implemented this and currently running without any issue.
AP failover happens without a problem. Need to have routes to both controllers from AP side.

raazuko
New Contributor III
Hi Pamuditha,did you use different networks on both sites?

pamuditha_abeys
Contributor
Yes. For control and management interfaces we used separate VLANs and separate IP subnets.
For cluster VLAN extended via pseudowire.
Thanks