Can I create 2-node vSZ cluster setup with each node having different VLANs.

[pamuditha_abeys]

I am creating 2 node vSZ cluster. Nodes will be put in two different sites. As per network architecture, VLANs are not span between sites.
So in my setup management and control will have different VLAN IDs and different IP subnets while cluster interface will be extended through pseudo-wire.
Is this setup possible to have with automatic failover and all other vSZ functionalities?
Latency between sites 5ms.
BW 10G

Thanks

[raazuko]

HI pamuditha,Did you get past this?I am also facing the same here 😞

[pamuditha_abeys]

Hi Raju,
I have implemented this and currently running without any issue.
AP failover happens without a problem. Need to have routes to both controllers from AP side.

[raazuko]

Hi Pamuditha,did you use different networks on both sites?

[pamuditha_abeys]

Yes. For control and management interfaces we used separate VLANs and separate IP subnets.
For cluster VLAN extended via pseudowire.
Thanks