802.1X Virtual Smart Zone using NPS with Error Code:66

[stephen_johanns]

We have our 802.1x RADIUS Server configured to use an NPS Server.

When we test the RADIUS Server from the Smart Zone Controller or via an 802.11x enabled SSID it fails.

In the logs on the NPS Server we see

Error Code: 66 
Reason Code: The user attempted to use an authentication method that is not enabled on the matching network policy

[syamantakomer]

Hi Stephen,

Could you select EAP Types and make sure correct certificate is mapped?



Also enable "Wireless Other" in NAS Port type.



Post making above changes if you are still facing issues, please open a support case and they will assist you.

Regards,
Syamantak Omer

[stephen_johanns]

PEAP Cert Details:




Changes applied:




Same Issue on NPS:

[syamantakomer]

Please open a support case from the below link and support team will help you to check the issue further.

https://support.ruckuswireless.com/cases/new

Regards,
Syamantak Omer

[stephen_johanns]

Error was fixed by changing the Condition on the Connection Request Policy to Day and Time Restrictions (allow all)

[syamantakomer]

Good to know that issue has been fixed!

Regards,
Syamantak Omer