cancel
Showing results for 
Search instead for 
Did you mean: 

802.1X Virtual Smart Zone using NPS with Error Code:66

stephen_johanns
New Contributor II
We have our 802.1x RADIUS Server configured to use an NPS Server.

When we test the RADIUS Server from the Smart Zone Controller or via an 802.11x enabled SSID it fails.

In the logs on the NPS Server we see

Error Code: 66 
Reason Code: The user attempted to use an authentication method that is not enabled on the matching network policy


Image_ images_messages_5f91c403135b77e247919cac_5673b2e8c6b65077c302b0ff6327f88e_RackMultipart20200924571447ios-a5e447fd-a1a3-4e56-b568-271b1055fa6a-1589087405.png1600946923
9 REPLIES 9

Hi Stephen,

Could you select EAP Types and make sure correct certificate is mapped?

Image_ images_messages_5f91c48c135b77e247ae0a21_aa4c0e039503d3ff4fa3fc7ce06bee5f_RackMultipart2020092430026bir5-e9542233-f905-468a-9f94-63163f0a3dac-1525658677.png1600973903

Also enable "Wireless Other" in NAS Port type.

Image_ images_messages_5f91c48c135b77e247ae0a21_cd5eecfaf7b87c8f4838e7b576bd936c_RackMultipart2020092479892i1lo-f6a3e853-3f9f-40bf-bdde-9f1b365c9c6e-2067588036.png1600973833

Post making above changes if you are still facing issues, please open a support case and they will assist you.

Regards,
Syamantak Omer

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

PEAP Cert Details:


Image_ images_messages_5f91c48d135b77e247ae3d6a_ed1d63ace3ccf077daa76874776bbff3_RackMultipart20200925981331hke-f4c3b51a-0edc-406a-98e4-fda92c3dfaaf-992885797.png1601026795

Changes applied:

Image_ images_messages_5f91c48d135b77e247ae3d6a_88f5258e7ac840634eff8877a69dfed5_RackMultipart2020092598084sjzx-84752ea6-9eb8-4efd-987b-02755f71bed3-835448812.png1601026858


Same Issue on NPS:

Image_ images_messages_5f91c48d135b77e247ae3d6a_40bdfa74d8f26f876247174561aca36e_RackMultipart20200925111494jvd-eb78a510-c9bb-4083-a836-48ad83512f83-170875645.png1601026893

Please open a support case from the below link and support team will help you to check the issue further.

https://support.ruckuswireless.com/cases/new

Regards,
Syamantak Omer

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

stephen_johanns
New Contributor II
Error was fixed by changing the Condition on the Connection Request Policy to Day and Time Restrictions (allow all)

Good to know that issue has been fixed!

Regards,
Syamantak Omer

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn