04-09-2018 10:28 AM
07-02-2020 02:03 PM
07-03-2020 06:28 AM
12-08-2020 09:13 AM
I still do not see a way to disable 2.4GHz at any level other than turning it off for each specific AP. It is not an option at the AP Group level or the WLAN group level. With Zone Director I was able to create an AP group that had the setting to not use the 2.4 GHz radio. When I wanted to have an AP use 5 GHz only (perhaps due to interference with other equipment), I would just move that AP into the group and it's 2.4 GHz radio would turn off. I don't see how to do that with SmartZone.
12-10-2020 07:39 AM
You can associate or disassociate a WLAN from 2.4 or 5G radio by playing with AP group and WLAN group settings.
I hope you have referred the previous comment and the link provided on it.
07-17-2021 09:51 AM
I do not see how this works i created wlan group and ap group. i want 2.4g turned off. i get the following error when i try to turn off 2.4 on the group.