upgrading beyond 08.0.95g

[Thomasneffldo]

Should we upgrade from 08.0.95g to 08.0.95t or even into version 9 or 10? What's the differences?

Just finally figured it all out from having the rotating issue so figured if it is recommended I'll do it now while I still remember everything.

Thanks

[DavidCh]

Hello Thomasneffldo,

We don't recommend upgrading your ICX7150 beyond 08.0.95g (UFI). This is the recommended version for Lennar Home setup.

Version 08.0.95t has some enhancements for bigger switches which handle protocols meant for enterprise networks, so would not add any improvement to your home setup.

9 and 10 version are also meant for other more robust models and needs.

Let me know if you have any questions, we are at your service.

Best regards,

[Sgatjens]

Hello @Thomasneffldo 

For Lennar deployments, we recommend upgrading to 08.0.95g (UFI), which is the validated stable firmware version for these users.

How to upgrade RUCKUS ICX-7150-C12P from Non-Unified Forwarding Image (UFI) to a stable UFI version

 Best regards,

[Sgatjens]

Hello @Thomasneffldo 

I trust this message finds you well. 

I kindly request an update on the status of the issue so that we may proceed further with resolving it. 

Thank you. 

  

Best regards, 
 
RUCKUS | Lennar Home Community Support 

[Imran_ruckus]

Hi  @Thomasneffldo 

Please see the Important Announcement Below.

Important Announcement! As a part of our Community Platform Migration the community will be temporarily placed into read-only mode from Monday, August 10 through Monday, August 17 (and only during this time period), For any Lennar RUCKUS devices related issues please email us at [email protected] for assistance. You can also continue reviewing the Lennar Knowledge Base and the Lennar Support board during this period.

Thank you!

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support