power outage, ruckus not working at all. all lights flashing

[SIBAZZ]

Hello , MY RUCKUS SWITCH FLASHING ALL LIGHTS. HOW DO I GET IT UP AND RUNNING AGAIN

I tried resetting by unplugging and leaving reset pin and the letting go when everything is flashing

i cant seem to get this to work. how can i fix this

[Jayavidhya]

Hi @SIBAZZ 

Thanks for your response.

Based on the images you have shared, it seems that you need to update the driver so that your laptop recognizes the COM ports of the devices.

Please try to update the drivers and try the software recovery process again.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[SIBAZZ]

[SIBAZZ]

[SIBAZZ]

okay i did it this is what the device is showing now

what do i do now

[Jayavidhya]

Hi @SIBAZZ 

Thanks for your response.

Please let us know whether you have downloaded the firmware for performing software recovery process.

Also please follow the below link which explains the software recovery process in detail.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-re...

Ruckus ICX Recovery Load boot code from boot monitor

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community