how to set up a replacement of switch icx7150-c12p and access points

[tanchen75]

I just got a new  ICX7150-c12p for replacement. I have three access points. After plugged in with the new switch, I can see  that there are three recover.me wireless and one configure.me, and all access points are blinking green on 5G and 2.4G without other light on.  Since this is first time I am doing this, is there a step by step guide  on how to set up in order to get them to work?

[tanchen75]

this is what i got after reboot

[Vásquez_Fer]

Hi @tanchen75 

Hope you are doing well ! 

Please make sure the cable from the Router ( Local ) ISP  to the Switch is well plugged in 1 of the 12 ports available, as shown in  following example:

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Best Regards 

Fernando Vasquez 

[tanchen75]

Hi, Fernando

The problem has been resolved. It looks like a problem with the cable.

Thank you very much.

Tan.

[Yarenis]

Hi @tanchen75

Thanks for the Upgrade, and we are glad that the issues have been fixed, Please feel free to mark the post as ACCEPTED SOLUTIONS.

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community Moderator