I have two access points mounted to ceiling which has no power since a day now.
I have tried what I can such as disconnect and connect back main switch to power source multiple times. Also tried reset the main switch by pressing reset button while putting the plug back to power source but not working. Any help will be appreciated to get things back on track.
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive