Want to connect a Digital Watchdon CCTV Analog DVR to Ruckus Wireless House System
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-25-2023 10:18 AM
Hello,
Just spoke to a representative in which he told me to submit my request through here.I have a smart home with all Ruckus equipment. Ruckus switch in panel box and 3 Rukus AP's on the ceilings. I want to install 3 more cameras but don't want to spend for additional Ring cameras when I have my analog CCTV system from my house back in NY. I bought everything separate and cost almost $3000.00 so why waste it..LOL!!
Its a Digital WatchDog Vmax AHDCORE 8-channel system with analog cameras. Would I be able to run a cat 5 from the DVR to one of the ports on the Ruckus Switch? If so, what do I need to do.
Looking forward to your help on this for as I am stuck at this moment.
Thank you.
Best regards,
Ron.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-25-2023 12:13 PM
Hi @Multirc
Greetings!!!
Thank you for contacting RUCKUS Lennar Home Community.
Hope you are doing well!!!
Thank you for the information you shared.
From the case description, I could understand that you need assistance in setting up smart devices to your RUCKUS setup.
You could connect any of your smart devices, Access Points, etc., to any 1-in-12 ports as shown in the below screenshot.
Please refer to the short guide link below about how to connect the devices as a reference:
Most common Setups for Lennar homes users:
Please let me know if you have any queries in this regard.
Thank you again for your patience.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.