Upgrading from 08.0.95N to 09.0.10j_cd4 ICX7150 web console not loading

[EarthLifeForm]

Like the subject says, I upgraded to 09.0.10j.  The web console doesn't load even though it shows it in the configuration

RuckusSwitch(config)#show web
HTTP server status: Enabled
HTTPS server status: Enabled
No web connection.

I have also tried 09.0.10j_cd3 with the same issue (see the results below)RuckusSwitch(config)#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 29360128, Version:09.0.10jT211 (SPS09010j_cd3.bin)
Compressed Sec Code size = 29360128, Version:09.0.10jT211 (SPS09010j_cd3.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compressed Sec Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Code Flash Free Space = 983105536

I also noticed during boot up an error.

Error [1 ui_common_send: Not able to apply - itc error please try again] parsing line: [web-management http]

I follow the instructions here -> https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-3A82588D-F1EF-4325-8396-EED525B9D24...

I have tried to change the IP as suggested -> https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7150-9-00-10-Web-Service/td-p/39285

no luck.

[Imran_ruckus]

Hi @EarthLifeForm 

Thank you for your prompt response and update.

I kindly request you to once again try the steps as outlined in my previous message and verify the results.

I appreciate your patience and understanding.

Best regards,

Imran Sanadi
RUCKUS Lennar Home Community

[EarthLifeForm]

RuckusSwitch#configure terminal
RuckusSwitch(config)#web-management http
HTTP already enabled
RuckusSwitch(config)#aaa authentication web-server default local
RuckusSwitch(config)#write memory
write memory is in progress, please wait...
write memory completed. No new config is added.

RuckusSwitch(config)#show web
HTTP server status: Enabled
HTTPS server status: Enabled
No web connection.
RuckusSwitch(config)#

Same results when navigating to

http://ip

https://ip

https://ip:8443

Both HTTPS and HTTP are not working

[Imran_ruckus]

Hi @EarthLifeForm 

Please use the private chat option to respond so we can proceed further. For your reference, I have included a screenshot below.

Thank you once again for your patience and understanding.

Best regards,

Imran Sanadi 

RUCKUS Lennar Home Community

[Imran_ruckus]

Hi @EarthLifeForm 

Please use the private chat option to respond so we can proceed further.

Thank you once again for your patience and understanding.

Best regards,

Imran Sanadi 

RUCKUS Lennar Home Community

[Imran_ruckus]

Hi @EarthLifeForm 

Thank you for your patience.

As discussed on the private chat, I will check on the lab regarding the web portal access.

Meanwhile please refer to the link about the VLAN.

https://docs.commscope.com/bundle/fastiron-08095-l2guide/page/GUID-9B341D5A-7576-41BA-AC85-F75F9340A...

Please let me know if you have any queries in this regard.

Thank you again for your patience.

 Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.