Unleashed 200.9.10.4.233 firmware

[sander_groen]

Hi all,

I see that unleashed firmware 200.9.10.4.233 has been released if you look on the master AP via the browser. I don't yet see it on the site hence there are no release notes available yet. I succesfully upgraded my 3 ap's (2 x R710 and 1 x R610) to unleashed 200.9.10.4.233 however 2 AP's (except the master) were having reboot loops. They come online and shortly after they were rebooting again. I flashed back to version 200.9.10.4.212. Was the release of 200.9.10.4.233 premature?

Thanks!

[Anonymous]

I'm seeing kernel panics with R320 AP on 200.9.10.4.233

[dariusz_basiaga]

Constant reboots of my R510 with the x.233 version! Longest uptime is 85 seconds!  I have IP cameras so now my security system is basically useless  

[Anonymous]

same here.. R510 with the x.233 version.. keep reboot with kernel panic after update but only after I turn on call over wifi.  So I just turn off Call over wifi and that stopped the reboot .. 

my call over wifi is Tmobile with 3 ePDGs

I think it was not crashing with just 1 ePDGs.. could be a hint.. anyway, I need to roll back to .212 now.. No time to mess with this.

1	epdg.epc.mnc260.mcc310.pub.3gppnetwork.org		EditCloneMove Down
	2	ss.epdg.epc.mnc260.mcc310.pub.3gppnetwork.org		EditCloneMove UpMove Down
	3	ss.epdg.epc.geo.mnc260.mcc310.pub.3gppnetwork.org	208.54.37.80	EditCloneMove Up

[kay_beng_chua]

Adding an additional observation regarding the reboots [AP Restart: kernel panic] and [AP Restart: application reboot] on 200.9.10.4.233.

I just gotten a R650 (acting as Master) and R550. Both APs were running OK for a few days and I decided to try out Wi-Fi Calling. Configured the Profile and assigned it to a SSID.

This is when the AP started rebooting  in tandem. Managed to disable Wi-Fi Calling and all is back to normal again.

[Anonymous]

I had the exact same thing happen.