04-06-2023 09:17 PM
I pushed a Lennar home from the original owner, the house is equipped with a R510 AP. Since the connection was unstable (constantly dropping internet) I rebooted. After rebooting the AP, I follow the instructions to create the unleashed network account. I followed all steps, regaining the activity in the AP. However, I have notice two things:
1- The AP power light is green with a slow blink. The control light is a week green. The 2.4G light is solid amber, and the 5.0G changes from amber to green.
2. After creating the unleashed network (in a Mac computer) I have not been able to connect to it. It states that there is no internet connection. I tried connecting with safari, chromo, and Firefox. Can someone help?
04-07-2023 12:12 PM
Hi @JMOCANA
Please follow the below link to find the IP address of the switch.
Best regards,
Jayavidhya
Lennar Home Community
04-10-2023 06:08 AM
Hi @JMOCANA
If you have any issues with the LANSCAN please download the application advanced IP scanner. To find the IP address of the switch using IP scanner please follow the below guide.
The below image will help you in identifying the IP address of the switch.
If you still have difficulties in finding out the IP address of the switch please share the screenshot of the image listing all the IP addresses.
Best regards,
Jayavidhya
Lennar Home Community
04-07-2023 11:55 AM
This is from Terminal:
04-07-2023 01:30 PM
I used LanScan, and no Ruckus Wireless was found.
04-07-2023 01:48 PM
Bingo!
The orange ethernet cable was not plugged to the router. I plugged it and know I do have visibility of the Ruckus IP address