cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to connect the Ruckus Unleashed App to my WAP

nsmith2
New Contributor
Recently I had a power cut, since then I am unable to connect and manage my Ruckus unleashed WAP network using my IOS mobile phone. I am 100% entering the correct password and IP address, but when I attempt to login it says ‘login failed destination IP is not an unleashed IP’.
Could you please help me resolve as I am unable to contact the dealer who installed the system.
Thank you
1 ACCEPTED SOLUTION

Hi @nsmith2 

Thank you for your response.

That’s great to hear! I was able to help you.

We truly appreciate your time and patience throughout this case.
Thank you once again for reaching out to the RUCKUS Lennar Home Community. Should you have any further questions or need assistance in the future, please don’t hesitate to contact us.

Wishing you a wonderful day ahead!

If your issue has been fully addressed, please click the Kudos button and mark the responses as an Accepted Solutions.

 

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

View solution in original post

44 REPLIES 44

Imran_ruckus
Community Manager
Community Manager

Hi @nsmith2 
Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

Could you please confirm if this inquiry is related to a RUCKUS setup in a Lennar Home?

Looking forward to your response.

 

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Hello Imran,

Thank you for your email.

I’m not sure what a Lennar Home is ?

I have 4 x Ruckus WAP in my personal home. All working ok and when I last checked about 2 weeks ago were all on the latest SW.

For some reason I can no longer access my network using the Ruckus unleashed App !

I am entering the correct IP address and password. I have deleted the app, and tried again, but still no luck.

I am unable to attach a photo or reply direct to your email

Hi @nsmith2 

Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

I hope this message finds you well.

We appreciate the detailed information you have provided. 

Based on your description, it appears that you are experiencing difficulty logging into the RUCKUS Unleashed application and web browser. 

This issue commonly arises when your RUCKUS Access Points are running an outdated version that prevents access to the Unleashed application.

To assist you further, could you please provide us with the following details:
- Log in to your Unleashed system using a laptop web browser with the Master AP IP Address or visit https://unleashed.ruckuswireless.com/ Kindly check and share a screenshot of the current version of your Unleashed Access Points.
- Ensure that your device is connected to the RUCKUS Wi-Fi Network for access.

If you encounter difficulties accessing the above link or if you are unsure of the IP Address of your Access Points, please refer to our guide on finding the IP Address of the Access Point: 

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-o...

You should see the below-Unleashed dashboard after finding the IP Address of the AP. Try to log in

Once you have located the IP Address of the Access Point and accessed the Unleashed dashboard, please proceed with the following steps:
1. Log in to the Unleashed system and upgrade your RUCKUS Unleashed system to the recommended version as described in the below RUCKUS Lennar Knowledge Base self-help article.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Upgrade-process-of-the-RUCKU...

2. After upgrading all Access Points, uninstall the current Unleashed application and install the updated version.
3. Attempt to log in again and verify functionality.

Should you have any questions or require further assistance, please do not hesitate to contact us.

Thank you for your patience and cooperation.

 

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Hi Imran, I have followed your instructions and it shows firmware unleashed is up to date. The current firmware version is 200.15.6.212.27 model R320 x 4 off.
I don’t how to send you a screenshot as I can’t reply directly to your email