04-27-2025 01:03 PM
I haven’t logged on my unleash app in a while and now it’s telling me I’m not connected to unleash network
04-28-2025 07:24 AM
Hello @Famous1,
Greetings!!!
Thank you for contacting RUCKUS Lennar Home Community.
I hope you are doing well!!!
Thank you for the information you shared.
As per the case description, I understand that you are unable to login to the Unleashed app.
Could you please log in to your Unleashed system on a LAPTOP WEB BROWSER using the AP IP Address OR https://unleashed.ruckuswireless.com/ ?
To assist you further, I would require few configurations from your Switch.
Please follow the below steps and help us with the queries,
1) To check this, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P
I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.
How to find the IP Address of the RUCKUS Devices (Switch and APs) using IP Scanner free applications:
2) Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”
If you can access the Command line should look like this:
ICX7150-C12 Router> OR
ICX7150-C12 Switch>
Please enter the below commands once you log in to CLI and share the output.
Note: Hit Enter to accept each command
enable
show version
show flash
Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.
Thank you again. We appreciate your patience and understanding.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.
04-28-2025 09:05 AM - edited 04-28-2025 03:39 PM
Omg! This is so technical. Can you call me instead
04-28-2025 09:33 AM
Hi @Famous1 ,
Thank you for the response.
Could you please log in to your Unleashed system on a LAPTOP WEB BROWSER using the AP IP Address OR https://unleashed.ruckuswireless.com/ ?
If you can’t access using the above link and don’t know the IP Address of the Access Points. Please refer to the below guide to find the IP Address of the Access Point to get the requested information.
You should see the below-Unleashed dashboard after finding the IP Address of the AP. Try to log in
Once you see the above dashboard, please try to use the default combination credentials as mentioned below.
Please check the current version of your Unleashed Access Points and share a screenshot of the same.
Please refer to the below screenshot for more information on how to know your Unleashed Access Points version details.
Please help us with the above requested information and let us know if you have any queries in this regard.
Thank you again for your patience and understanding.
Regards,
Pinky Rajendran
RUCKUS Lennar Home Community
04-28-2025 09:11 AM
So I did it and I’m at the part that says switch