The power indicator light is not on and cannot work

[Andy1]

The power indicator light is not on and cannot work

[aalvarez6]

Hello @andy1

Since you are a Lennar user, please refer to the Lennar forum for further assistance :

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/tkb-p/lennar_tkb

Regards, 

Ayleth Alvarez

[Imran_ruckus]

Hi @Andy1 

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

I hope this message finds you well. 

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.

To proceed, we kindly request that you follow the steps outlined below:

1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.

2. Capture both pictures and a video of the switch, focusing on the following:

   - The status of the lights on the switch.

   - The cord connected to the switch.

   - The switch plugged into a working power outlet.

We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:

Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link. 

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Andy1 · Accepted solution]

I read the messages in the group and after doing the same, the power light still doesn't light up and it doesn't work, It should be a hardware malfunction of the machine. How can it be repaired or replaced? I was unable to send you the email with the operation video successfully, and I am also unable to send you the operation video here.