SpeeFlex: slow performance after R710 upgrade

[rosewood72]

I recently upgraded from R510 to R710 APs. Now, I'm experiencing some slowness. I used to be downloading over 300Mbps but now I'm lucky if I get 295Mbps. Looking at SpeedFlex, AP to AP is also slower on the 710 than 510. 50 to 100 Mbps is a considerable drop in performance. Should I continue using 710 or just move back to 510?

[pinky_ruckus]

Hello @rosewood72 ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you are facing slow performance issues after upgrading the APs to R710.

Could you please share the picture of the connection ports of the switch as shared in the below pic?

Also please confirm it the ethernet cable is plugged to one of the 12 ports in the Switch?

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @rosewood72 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[rosewood72]

no thank you. The other thread answered my questions related to this. 

[pinky_ruckus]

Hello @rosewood72 ,

Thank you for the response.

We are glad to know that your questions were answered.

Please feel free to contact us if there are any issues in this regard in future.

Thank you for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.