Showing results for 
Search instead for 
Did you mean: 

Ruckus switch not working

New Contributor

I had a power outage and trying to restore internet. Ruckus switch has orange and green light on but no activity at the 3 access points on each floor in my town house. This has happened before and it took several hours to work again.  Need help.



Hi @DarrenMB 


Greetings of the day,


Based on the description it seems that your switch has one green and one yellow light, it means that the switch is stuck in boot mode.

1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.

2-Please try to press the reset button using a paper click or a small stick 

  1.  Remove power from the switch.
  2. Press and hold the Reset button while applying power to the switch.
  3. After all the system LEDs flash amber, release the Reset button.

Video link:


If the resetting process doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

How to perform a Software recovery on an ICX7150 switch


Ruckus ICX Recovery Load boot code from boot monitor


Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

2. Upgrade a Switch ICX7150-C12P via TFTP

3. Upgrade a switch via Web GUI (ICX7150 Switch)



Please let us know if you have any queries in this regard.



Best regards,


Lennar Home Community


I started reading some other comments, pressed reset button and it worked.

Hi @DarrenMB 


Thanks for your response.


Please confirm whether the issue got resolved or not.


Best regards,


Lennar Home Community