11-14-2024 01:53 PM
My system is not working after a black out. The machine seems like working but the router is not blinking at all.
I am using a ICX 7150-C12P product
Not sure about the serial number, but I think it is this. MAC:C0:C5:20:A7:35:D3
Can you please send a technician?
11-14-2024 02:03 PM
Hi @dkny1982 ,
Greetings!
Thank you for contacting RUCKUS Lennar Home Community.
I hope you are doing well!!!
Thank you for the information you shared.
From the case description, I understand that your Ruckus Switch is not turning on and there are no lights blinking.
We would suggest you to please perform a hard reset on the Switch.
Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to hard reset the Switch
Please follow the process as explained in the article and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.
11-18-2024 06:39 AM
Hello @dkny1982 ,
Greetings!
This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.
I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.
Please feel free to contact if you have any further concerns regarding the same.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.
11-20-2024 08:21 AM
Hello @dkny1982 ,
Greetings!
This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.
I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.
Please feel free to contact if you have any further concerns regarding the same.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.