Ruckus inconsistent WIFI signal

[jeff_schultz]

ICX 7150-C12P  SN FEK3838ROVZ  

I lost power and after power was restored the WIFI signal comes and goes, mostly gone.....  When there is signal, it is strong.

I've tried rebooting multiple times without an improved consistency.  Based on some of the research in the knowledge base, I've include the version and flash output.

Thank you in advance for your help!

ICX7150-C12-Router>enable
No password has been assigned yet...
ICX7150-C12-Router#show TFTP session timed out
version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Sep 23 2019 at 00:00:25 labeled as SPR08090d
(32539748 bytes) from Secondary SPR08090d.bin (Non-UFI)
SW: Version 08.0.90dT213
Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 07:08:55 2019

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3838R0VZ
Software Package: ICX7150_BASE_L3_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 1 minute(s) 25 second(s)
The system started at 00:03:44 GMT+00 Sat Jan 01 2000

The system : started=cold start

======================================================================================
=============== WARNING: FI image is not booted from UFI!!! ===============
====== Please download UFI image and reboot the system for full functionality ======
======================================================================================
ICX7150-C12-Router#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 28660224, Version:08.0.90dT211 (SPS08090d.bin)
Compressed Sec Code size = 32539748, Version:08.0.90dT213 (SPR08090d.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compressed Sec Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Code Flash Free Space = 1260408832
ICX7150-C12-Router#TFTP session timed out

[Sgatjens]

Hi @jeff_schultz  

The only command you need to execute is "copy tftp flash 10.176.220.51 SPS.bin primary".

Please check this link: 
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

And please proceed from the section: Continue with the upgrade, using the image

Kind regards,

Sofia Gätjens

[jeff_schultz]

Hi Sofia,

Sorry for my continued problems..... I've taken a screen shot of my results.  And I have two questions. 

1. For some reason my tftp command times out.  In the screen shot, you can see where I've displayed the contains of my "upgrade" directory containing the SPS.bin file as well as displaying the show flash verifying the tftp command failed. Thoughts on why I am encountering the timeout? 

2. After I successfully execute the first tftp command the next step is to copy a file called, "SPS08095hufi.bin".  In my upgrade directory, you can see a file called, "SPS08095gufi.bin".  I've downloaded 08080f, 08095g and 08095f and can't find the SPS08095hufi.bin file. What version includes the correct file?

Thanks again for your help!  Happy Friday! 

[Sgatjens]

Hello @jeff_schultz 

I'm unable to view the images. Could you please resend them, preferably in a larger size?

Kind regards,

Sofia Gätjens

[jeff_schultz]

Hi Sofia,

Following are individual screen shots of my environment.  The first one is of my TFTP environment.

The second one is of the output of my terminal commands displaying the login to where I encounter the time out error of the copy tftp command.

User Access Verification

Please Enter Login Name: admin
Please Enter Password:
User login successful.

ICX7150-C12 Router>enable
No password has been assigned yet...
ICX7150-C12 Router#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 28660224, Version:08.0.90dT211 (SPS08090d.bin)
Compressed Sec Code size = 32539748, Version:08.0.90dT213 (SPR08090d.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compressed Sec Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Code Flash Free Space = 1260380160
ICX7150-C12 Router#copy tftp flash 192.168.0.245 SPS08080f.bin primary
ICX7150-C12 Router#TFTP session timed out

TFTP to Flash Error - code 5
ICX7150-C12 Router#

Can't seem to get past the session timed out error.  I am able to display the files in the upgrade directory okay.

Thank you again for your patience and help! 

[Sgatjens]

Hello @jeff_schultz 

Please use the following commands:

ICX7150-12P Router>enable (hit enter to accept the command)
ICX7150-12P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished)
ICX7150-12P Router#boot system flash secondary yes (hit enter to accept the command: the switch will reboot)

Once the RUCKUS ICX-7150-C12P switch reboots and comes online, should fix the issue.

Then share with me the "show flash"  and "show version" commands again. 


Kind regards,

Sofia Gätjens