Ruckus box needs to be replaced after lightning strike

[mikib973]

After a lightning strike across the street, my ruckus box stopped working. It’s been reset multiple times and nothing. This has happened before, 3 years ago, and the box needed to be replaced.  I called and was told to post this here and I should get a response from a tech. 
thx
ruckus  ICX 7150-C12P

SN: *****

[Imran_ruckus · Accepted solution]

Hi @mikib973 

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

I hope this message finds you well. 

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.

To proceed, we kindly request that you follow the steps outlined below:

I recommend again attempting a physical factory reset multiple times, as outlined in our RUCKUS Lennar Knowledge Base self-help article accessible through this link and VIDEO: 

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Process-for-performing-a-phy...

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

If the initial reset attempts do not resolve the issue, please try resetting your switch multiple times (approximately 10-15 times) using the method described in the article. In some cases, repeated attempts have successfully resolved similar issues. Upon successful reset, the SYST and PWR lights should turn GREEN.

If hard reset doesn't work, please proceed with the below process:

1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.

2. Capture both pictures and a video of the switch, focusing on the following:

   - The status of the lights on the switch.

   - The cord connected to the switch.

   - The switch plugged into a working power outlet.

We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:

Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link. 

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

[mikib973]

Ok did multiple resets and a factory reset. Still not working. Where should I send the pics and video?

[Imran_ruckus]

Hi @mikib973 

Greetings!!!

As mentioned in my previous post, please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link. 

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

[mikib973]

I’ve tried to upload the videos and can’t. Is there an email I can send them to?