04-24-2023 06:39 PM
I've recently noticed that one of my access points will not push out any wifi pass 100mbps, while my other one upstairs shows 1000mbps. I've always called the customer service line and they always increased it back to 1000mbps. How do I increase the speeds without causing any complications? This is causing my downstairs TV's to buffer due to low speeds.
Thank you,
05-05-2023 12:53 PM
05-05-2023 01:16 PM
Hi @Antoniobaker09
Please try the most common username and passwords ( This is key sensitive so please include capital letters )
Username:admin password: Ruckus!
Username:admin password: Ruckus1
Username:admin password: Lennar
Username:super password: sp-admin
Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users
Best regards,
Jayavidhya
Lennar Home Community
05-09-2023 08:53 PM
None of those usernames or passwords work. Whats the next option? Can you perform a system check if i give you access to my system?
05-10-2023 05:41 AM
Hi @Antoniobaker09
Thanks for your reply.
If default credentials do not work, please follow the below steps to reset the Password on the ICX-7150-C12P Switch
Please follow the below guide to perform password recovery.
Password Recovery on a Ruckus ICX Tutorial video
https://www.youtube.com/watch?v=XJS28DWbHM4
Recovery Process
1. Console access to the switch.
How to console in the ICX-7150-C12P
2. Reboot the switch with the console cable attached and press "b" until the following is displayed.
3. Using the following commands to remove the password
4. Set new password commands.
Enable
config t
username super password pass
Where super is the username and pass is the password
Wr mem
exit
Reload
Are you sure? (enter 'y' or 'n'): y
Best regards,
Jayavidhya
Lennar Home Community