Ruckus R510 Access Points PWR blinking green

[iampresidito]

Ruckus ICX 7150 switch connect to 3 Ruckus R510 Access Points has the PWR light blinking in green but the CTL has a steady green on just 2 of them and blinking on 1. 

[Jayavidhya]

Hi @iampresidito

Based on your description,  PWR LED blinking Green means that the Access Points are not getting an IP address from router. Please confirm the cable connection of your device.

Check if the port the AP is connected to is providing DHCP services on the Native/Default VLAN.

The versions must match for the AP to join the network unleashed existing

1-Connect the AP to your router to get a valid IP
2-Ssh to the IP, default credentials are admin/sp-admin
3-Run the following command > show version

4-Confirm the version of the AP

Also let me add more detail to understand the LED lights of your Access points. 

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

Best regards,

Jayavidhya

Lennar Home Community

[iampresidito]

There is internet connection despite the blinking PWR and CTR lights. Per your instructions - the AP is connected to the router via the switch connect. 

[Jayavidhya]

Hi @iampresidito

Thanks for your reply. If the PWR is blinking green it means that the access points are not getting IP from the DCHP server > Local router. 

Please check the following guide to make sure is the right devices and the connections 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Best regards,

Jayavidhya

Lennar Home Community

[iampresidito]

Can I get a call or some kind of video to run me through the steps more vividly.