cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX7150-C12P RMA Request

Jxck
New Contributor II

Hello ICX7150-C12P switch has failed. Despite numerous attempts to troubleshoot the issue using guidance from this forum and various online resources, the device appears to be non-operational. It will not even power on, no lights, I've tried different power, cables. It sounds like the power supply is clicking. I've tried rebooting and the reset buttons. I have been in touch with a representative via chat and provided the serial number as requested. I was advised to post here for administrative approval. Could you kindly inform me about the subsequent steps in the RMA process? Thank you, and I hope you have a splendid day.24-01-31 16-44-13 5063.jpg

 

24-01-31 16-44-17 5064.jpg

 

3 REPLIES 3

Imran_ruckus
Moderator
Moderator

Hi @Jxck 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS ICX-7150-C12P Switch is not powering up.

Could you please plug your ICX-7150-C12P Switch into a working power outlet and send us PICTURES and VIDEO of it showing the light status, and cord connected to the Switch and a working power outlet? Please refer to the below pictures as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding. 

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Jxck
New Contributor II

I’ve uploaded to the link provided.

Thanks! 

Hi @Jxck 

Greetings of the day!!!

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes an amber light and then goes dark. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided below:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.