Ruckus ICX7150 C12P-2X1G is not working and my 3 Access Points are not working.

[data25279]

After a recent power surge both my Ruckus Access Points and Switch seem to be encountering problems. My APs are off, and after looking at the Ruckus Unleashed website it looks as if both my APs and Switch are disconnected (the website states that it couldn't ping my switch's ip address and to check the network, and the network seems disconnected as well). My Switch's System Status LED and Power Status LED are both green, which to my understanding means it's NOT in Boot Mode. Additionally, when I connect to the Switch through an Ethernet cable and the CLI, I see that it boots in switch mode and not router mode. Connecting an Ethernet cable from my switch to any of the APs does not turn on the AP, and I see that the LED on the port itself is off. However, when I try to connect some other device to the same port with the same cable, the LED turns on (is the power being restricted from going to the AP?). Please help.