Ruckus ICX 7150-C12P system not working! Access points have no power.

[abw]

Hi I have an ICX 7150-C12P system with two access points. Two access points have no power. Of the ports, going top to bottom, left to right, first one has no light, 2nd one green, 3rd no light 4th orange. fifth and sixth no lights. No lights at all on bottom row. 

[abw]

It did nothing. I put the IP address in the PUTTY program and it's blank. 

[Imran_ruckus]

Hi @abw 

Thank you for the response and the information you shared.

When you try to access the IP Address in a web browser URL, you should see the Switch Dashboard as shown in the screenshot below to confirm it’s a Switch IP Address. 

Please check the other IP Addresses from the IP scan results, by the name of Ruckus Wireless or Brocade Communications, to confirm the IP address of the Switch and access the CLI.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[abw]

Okay now it's showing up but I have no idea what the password is. I've tried all of the common ones listed on the link you provided above. 

[abw]

Okay I got in. I put in the commands. This is what I'm getting now; 

[Imran_ruckus]

Hi @abw 

Greetings!

Thank you for your response and the update.

The command outputs look fine. Could you please let me know the current light status of the Access Points?

Additionally, please provide the output of the following commands:

enable
show version
show flash
show inline power detail
show interface brief

Please feel free to reach out if you have any questions regarding this request.

Thank you again for your patience.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support