cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX 7150-C12P doesn't turn on (No power, no status light)

Joyced
New Contributor
Already tried different power cords/outlets, but no luck. Also tried the reset instructions below, no work either. Please help.
  • Remove power from the switch and confirmed that the switch is plugged into a well-known outlet/power source.
  • Press and hold the Reset button while applying power to the switch.
  • After all the system LEDs flash amber, release the Reset button.

 

IMG_5031.jpeg

IMG_5035.jpeg

5 REPLIES 5

Jayavidhya
Moderator
Moderator

Hi @Joyced 

 

Greetings of the day,

 

Please let us know the LED status of the access points using the below guide.

 

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

 

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community

No LED lights are on. 

Hi @Joyced 

 

Thanks for your response.

 

Please try to check by replacing the another power cord with the switch and let us know the result.

 

Also please share a picture and a video while the ICX7150 is connected directly to the power outlet, and showing there are no lights.

 

 

Here I attach the link to upload the video.

 

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

 

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community

Still no lights. The link on where to upload the video isn’t showing anything. I attached a screenshot of it as well below. 

IMG_5036.jpeg

IMG_5038.png