Ruckus 7150-C12P WiFi not working after storm

[mbotkin]

Lennar home, first owner. Been using the Ruckus with our home since 2019. After a power outage 2 weeks ago our ruckus network hasn't been performing. Our LAN and wired connections work fine but WiFi is showing connections but nothing loads or it's greatly reduced. We've rebooted the Ruckus many times and rebooted the WAPs but it's not working for WiFi. Not sure what to do or if this is a hardware problem. I’ve also flashed the APs and updated the firmware to 200.15 and the issue still persists. Hardline connections are working throughout the home, WiFi shows connection and either is very slow by normal conditions, doesn’t load others, or works normally for others. The majority of the time it shows connection for WiFi but nothing loads despite having full signal connection.

[Imran_ruckus]

Hi @mbotkin 

Greetings!!!

Thank you for the response and the update.

You can access the CLI using the Telnet option. From the telnet CLI prompt, I see your Switch is stuck on Routing code.

Please Enter the below commands in CLI to fix this issue:

Note: Hit Enter to accept each command 

enable

copy flash flash secondary 

boot system flash secondary yes 

Example: 

VIDEO LINK AS REFERENCE: https://www.youtube.com/watch?v=Eem1IBgYaWc

ICX7150-24P Router>enable (hit enter to accept the command) 
ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished) 
ICX7150-24P Router#boot system flash secondary yes (hit enter to accept the command: the switch will reboot)

Please let me know if you have any queries in this regard.

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[mbotkin]

it seems to have frozen here

[mbotkin]

when I did show flash this is what I saw

[mbotkin]

ICX7150-24P Router#boot system flash secondary yes (hit enter to accept the command: the switch will reboot) 

I keep hitting return and nothing happens here

And now the network is completely offline. 

[mbotkin]

Additionally now when I try to go to the IP address I get this: