06-02-2025 07:16 AM
Lennar home, first owner. Been using the Ruckus with our home since 2019. After a power outage 2 weeks ago our ruckus network hasn't been performing. Our LAN and wired connections work fine but WiFi is showing connections but nothing loads or it's greatly reduced. We've rebooted the Ruckus many times and rebooted the WAPs but it's not working for WiFi. Not sure what to do or if this is a hardware problem. I’ve also flashed the APs and updated the firmware to 200.15 and the issue still persists. Hardline connections are working throughout the home, WiFi shows connection and either is very slow by normal conditions, doesn’t load others, or works normally for others. The majority of the time it shows connection for WiFi but nothing loads despite having full signal connection.
06-13-2025 08:42 AM
Hi @mbotkin
Greetings!!!
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
Thank you.
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
06-13-2025 09:34 AM
Hey Imran, I’ll be working on this on Saturday and will report back what happens. Thanks.
06-13-2025 10:08 AM
Hi @mbotkin
Thank you for the update.
Please keep me updated about the progress.
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
06-08-2025 08:35 AM
I’m not able to get an IP address that is the switch’s IP. The only Ruckus IPs I get are the WAPs.
06-08-2025 08:36 AM
In the mobile app it shows no switches online or any information about the switch. I do see information for the WAPs such as their IPs, firmware, MAC, etc.
