09-25-2021 09:09 AM
Hello! I have an R710 and the radio lights on both the 2.4 and 5G radios quit working. Is there any way to reset so the radios are transmitting? Power indicator is flashing and the CTL indicator is solid. Any help would be appreciated.
09-27-2021 12:00 PM
Hi James,
Power indicator should be stable green, then only it indicates that it has a valid IP address.
I think your AP lost the gateway or IP configuration.
Try to factory default the AP by pushing and holding reset button for 12 seconds and reconfigure the AP.
09-28-2021 02:26 PM
Thank you, syamantak. I have many times now and I still cannot get into the UI no matter what I do. All passwords are rejected and I can't join the network. I've done a 30,30,30 as well to no avail.
In fact I put the pa's serial number in as the password for the fun of it and now it just continues to search for the network. No "invalid password" comes up...
Any thoughts?
Thanks agin.
09-29-2021 05:12 AM
If device is not getting an IP, that may be a related to your network.
To isolate the network issues, try to power up AP without connecting it to the network and then try to access AP by connecting a laptop directly into it.
You should be able to access AP over its default IP 192.168.0.1.
09-29-2021 09:23 AM
Thank you syamantak.
I've tried all of these solutions and still nothing.