R510IP Address

[ksucoop]

My Zoneflex R510 keeps shutting down. I would like to see if it needs a firmware update. Would like to find the IP Address to access the AP to update to latest .

[ksucoop]

Also, do I download the latest update ? The switch has never been updated since installment in  2018

[pinky_ruckus]

Hello @ksucoop ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @ksucoop ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[ksucoop]

I’m not able to use telenet option, not advanced to do that. None of the ID and passwords work to gain access to the IP address. The access point has been updated but the shuts down regularly I’m guessing from outdated firmware on the switch. I’m at a loss on what do. Not sure if it’s truly the switch the issue or access point.

[Imran_ruckus]

Hi @ksucoop 

Greetings!!!

Thank you for the response and the update.

If you are unable to access RUCKUS ICX-7150-C12P Switch by CLI with Telnet and no username/password working, the only option left is to access Console CLI and reset username/password.

To regain console access, please follow the instructions provided in the article linked below: How to Console into the ICX-7150-C12P

While you have the laptop connected to the Switch with a console USB cable and the CLI screen up it asking a username/password, reboot (unplug and plug from the power outlet), and follow the video below.

https://www.youtube.com/watch?v=0ynKwSTpd_A

Once you have successfully recovered the switch password, use the following commands to either modify the existing password or create a new username and password:

enable

configure terminal

device(config)# username super password pass

In this example, the username is ‘super’ and the password is ‘pass’ (you could use of your choice)

To ensure proper authentication, execute the following commands:

device(config)# crypto key generate rsa

device(config)# aaa authentication login default local

device(config)# aaa authentication web-server default local

Please let me know if you have any queries in this regard.

Thank you again for your patience.

 Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.