cancel
Showing results for 
Search instead for 
Did you mean: 

Previously Occupied Lennar Home

Jstansfield
New Contributor

Hello, I recently moved into a previously occupied Lennar home and am trying to set up the ruckus network. Unfortunately I have little to no experience with networks other than buying a router and plugging it in. 
I purchased a Netgear router and was able to establish that internet and wifi, but when I plug my Ruckus ICX 7150 into it I’m not able to get that functioning. Doing some browsing on forums it suggested a factory reset of the ICX, I did that but was still not able to find the “Configure Me” network.  Further suggestions recommended resetting one of the other devices installed on my ceiling.  I held the reset button on that which prompted the power light to go red, but otherwise I still haven’t seen anything I can set up or configure. Any help would be appreciated for a beginner. Thank you -JS

1 REPLY 1

Vásquez_Fer
Moderator
Moderator

Hi @Jstansfield 

Hope you are doing great ! 

Basically the devices that you need to reset are the access points ( white boxes on the ceiling ) the ICX 7150-C12P provide wired connection and Power to the Access Points.

I will leave you a common setups for Lennar home users to make sure the connections are correct 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

In order to Factory reset the Wireless access point I will leave you the correct guide how to do it also there are some video links how to configure/ and factory reset process 

Physical Factory Reset an Access Points Ruckus

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Ac...

Ruckus Unleashed Set-up using your Mobile

 https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Ruckus-Unleashed-Set-up-usi...

Best Regards 

Fernando Vasquez