Power Outage caused Ruckus Access Points to turn off

[jsun]

Hi, I had a recent power outage and my access points and no longer on

[pinky_ruckus]

test

[pinky_ruckus]

Hi , 

Thank you for your response.

To assist with obtaining console access on a Mac, please refer to the following video:

Video on Console Access for Mac

Additional video: https://www.youtube.com/watch?v=ZUREx-161H4

Kindly disregard the drivers demonstrated in the video. Instead, please download and install the drivers listed below before accessing the switch via the Mac terminal:

Mac iOS System Solution:

Install the necessary drivers to enable communication with the switch (ICX-7150-C12P) using a USB Type-C to console cable.

Drivers:

• Silicon Labs USB-to-UART Bridge VCP Drivers
• Ruckus Brocade ICX-7150 USB Serial Driver for Mac

Please let me know if you have any further questions.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

[pinky_ruckus]

test

[pinky_ruckus]

Hello @jsun ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @jsun ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.