Power Outage Ruckus 7150 - No connection Yellow Sys Light, Green Pwr Light

[Lennar010203]

Power Outage and now no Wifi is working in the house. Yellow system light is ON the Ruckus 7150 switch and green power light is ON. Hardwired ethernet connections are working in the house so assuming there is a connection from service provider and its the RUCKUS switch.

I tried connecting remotely with no luck and was able to connect directly to console with USB to C connector and Putty terminal (serial connection). I don't get a login request but the first thing that comes up is "ICX7150-Boot>". 

Does this mean I need software recovery? If this is the case, I'm confused by the other posts to even understand what I would need to do next. Also, command like "enable" etc. in other posts do not work in my terminal commands.

[Jayavidhya]

Hi @Lennar010203

Based on your description the file is larger than the amount of room on the device or TFTP server.

If you are copying an image file to flash, first copy the other image to your TFTP server, then delete it from flash. (Use the erase flash ... CLI command from the privileged exec model to erase the image in the flash.)

If you are copying a configuration file to flash, edit the file to remove unnecessary information, then try again.

Best regards,

Jayavidhya

Lennar Home Community