PWR LED blinking Ruckus R510 AP

[szow79]

Hi,

I'm trying to set up the network in my home. I've looked at previous posts in the forum and have not found a solution to my problem. I have AT&T gigabit fiber, and I'm pretty sure that I have connected all my devices correctly.

My cables are connected this way:
Fiber ONT --> AT&T provided modem/router --> Ruckus ICX7150 switch ports (1 of the 12).
Ruckus R510 AP --> Ruckus ICX7150 (1 of the 12) via PoE. 

I can set up the AP and connect to it afterwards; however, I can't use the internet or view its dashboard. Given the blinking PWR LED, I believe this is due to it not having an IP address assigned to it.

I tried connecting my laptop via Ethernet to the Ruckus ICX7150 with the modem/router connected, and I can connect to the internet, so I believe it's not an issue with the modem/router that AT&T gave me. 

I'm at a loss for what else I can do, any input would be much appreciated. 

[pinky_ruckus]

Hello @szow79 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[szow79]

Hi, I believe my guy followed all the instructions before asking for help. The APs are not connecting. I'm not sure if I can get a hold of him in the next 2 weeks to come to take another look & reply here.

[pinky_ruckus]

Hello @szow79 ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[szow79]

No it has not been resolved

[pinky_ruckus]

Hello,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.