Hi @Uachuk
Seems like you are presetting the routing code issue due the power outage the switch starts running the wrong code
As a solution for now you can connect to your local router via Ethernet or Wi-Fi and your are not going to have connectivity issues from there
I will leave a short Guide about the normal setup for home users:
Where the main (white) box in your cabinet is the switch (ICX 7150-12CP)
And the boxes on the ceiling are the Wireless Access Points
Most common Setups for Lennar homes users
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...
We have 2 ways to access to the Switch 1- In a logical way via Ip address (IPs are logical addresses given by the local router) so we would have to track which IP is that of the Switch (that is using).
1-This guide show you how to track the IP address of the Switch
How to find my Ruckus “Devices IP address” using free applications
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Device...
2-This guide show you how to access remotely to your switch
How to remotely access to 'ICX 7150-12P' or 'access points' "Network devices"
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...
3-This guide contains the usernames and passwords if accessing on the switch ask you for that
Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-password...
4-Here are the steps how to fix the ‘routing code’ step by step (2 guides)
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...
The other method to access to the switch is via console (cable access) in this case we need a USB type C to USB standard or Console cable Rj45 to USB.
1-Here is the guide on how to access through the console and pre-install the necessary software
How to console in an ICX-7150-12c
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...
2-Once you are log in you can follow up the Routing code guides to fix the issue that are on the step ‘4’
Best Regards
Fernando Vasquez
