No power to WiFi extenders and rings cameras

[MrG6872]

Turn off power from my beaker box to change a thermostat. Once completed, power back on the beaker box but WiFi extenders and rings cameras camera has no power. Ruckus and power and all plugs are in proper placement. Has anyone has this happen to them?

[pinky_ruckus]

Hello @MrG6872 ,

Greetings!

This is a follow-up in reference to the case you have opened in the RUCKUS Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hi @MrG6872 ,

Greetings! 

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it. 

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community

[Imran_ruckus]

Hi @MrG6872 

Greetings!!!

I trust this message finds you well.

This is Imran, one of the RUCKUS Tech Support Senior Engineers.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[pinky_ruckus]

Hello @MrG6872 ,

Greetings!

This is a follow-up in reference to the case you have opened in the RUCKUS Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.