I have a Lennar home with a Ruckus system and two access points. Neither access point is lit up. One is located on the 1st floor the other on the second floor. The light on the main box is blue and blinking. Both 1st and 2nd floor Ethernet cables are connected to the POE ports on the main box as well as my cable modem. They were working fine and then I noticed my internet was slow as I moved away from where my modem is connected noticing that none of the lights on either access points are lit.
We need to have access to the CLI to check and verify why Access Points are not getting power.
I have already described the step-by-step process to access the CLI of the Switch with Telnet Or SSH. Please once again check the IP address of the Switch (One with Brocade name) and try to access the CLI as described in my previous post.
Please let me know if you have any queries in this regard.
Yes, you keep sending me the same info but it isn't helping me. I'm stuck at the login page. I've tried all the user names and password combinations. Nothing lets me in. Can you simplify this please and tell me how to get in using the login page? It's looking for a password and I cannot get in otherwise. I've tried user names sp-admin and super and all the combinations of passwords. If I can get in I can follow the rest of your directions.
If you have a MAC device, please try to access CLI via the Telnet option from the terminal as described in the previous post. Or please let us know if you have a Windows device to help you access the CLI.
We have tried to create the guides as non-technical as possible so that they are not difficult to follow. However, if you continue to have difficulty following the steps, we would recommend that you seek outside help or a technician.