11-04-2022 03:30 PM
I have a ruckus switch ICX 7150-C12P. The power went out and rebooted it. I am now left with the switch having a lit up amber light on syst and a green on power. I have tried repowering the modem and the switch itself. I have also reseated all cat 5 cables to and from the switch and the AP’s. The AP’s currently have no power since the switch is POE. Does anyone have a solution to get the switch to resend out internet signal to the AP’s? Thanks a ton!
Solved! Go to Solution.
11-09-2022 02:13 PM
Hi @GlennJ
Based on your troubleshooting you have done, since the ICX 7150-12P is no responding even to the console connection, this unit must be RMA (return merchandise authorization) means replace it.
Feel free to contact us via chat, comment you already have a post, copy the link from the post and paste it into the chat to start unit replacement.
Chat:
https://support.ruckuswireless.com/contact-us
Note: Please mark the post as ACCEPTED SOLUTIONS
11-23-2022 08:10 PM
These forums have been s as huge help but unfortunately I’m having the same issues with my switch. I’ve tried ssh into the device and console into it but had no luck, I power cycled the devices and now the switch has no power. Non-responsive. I’ve reached out to Ruckus with the status via a ticket and I’m waiting for a response. Hopefully I get some traction as I work remote as a network engineer but dealing with basic issue..SMH
11-24-2022 04:28 AM
Hi @Rashidmoes1
Hope you are doing well !
Please create your own to have smooth communication, present your case and redirect you properly
Best Regards
Fernando Vasquez
11-24-2022 11:19 AM
Ok.. thanks for the heads up. Will do