My Lennar ruckus stopped working. Please provide your technical support.

[Ramesh]

My ruckus device stopped working. Upon checking I can sense smoky device. I even tried to reset per ruckus operating manual. Nothing happened. Need your assistance to resolve this. 

[Ramesh]

Jaya,

it says " i don't have permission to upload images". Can you please fix this for me to upload images ?

[Jayavidhya]

Hi @Ramesh 

Thanks for the information provided.

Please share the image of the switch showing LED light status.

Best regards,

Jayavidhya

Lennar Home Community
 

[Ramesh]

[Jayavidhya]

Hi @Ramesh 

Thanks for the information provided.

Based on the image you have shared, if the switch has green and yellow light, it means that the switch is stuck in boot mode.

Please follow the below steps to solve the issue.

1- Try to disconnect from the Power outlet the ICX- 7150 and reconnect it.

2- Please try to press the reset button using a paper click or a small stick 

1. Remove power from the switch.
2. Press and hold the Reset button while applying power to the switch.
3. After all the system LEDs flash amber, release the Reset button.

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...

Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4

If the resetting process doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-re...

Ruckus ICX Recovery Load boot code from boot monitor

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community