cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple attempts can’t change 7150-C12 to switch

Tams
New Contributor

I’ve completed all of the steps to correct routing problem to switch thru GUI several times. My son did also on separate device. It’s booting from primary SPS but still appears as router in unleashed app. I’m beyond frustrated. What else can I try? I’ve been using an ipad and MacBook. We couldn’t successfully upgrade to RUCKUS ICX FastIron 08.0.95g. I don’t have windows access. I’ve been stuck using two eeros for 6+ months and my kids can’t play video games because the internet constantly drops. Please check out the attached screenshots. I appreciate any suggestions. Thanks!B04B1D70-26FD-4FD9-A41C-E465D6FA7A48.jpeg612A1A48-3473-417D-9317-C5228591F38C.jpegDE2DDF74-E9EE-447E-8C19-F5AB09C76B32.jpeg

1 REPLY 1

Jayavidhya
Moderator
Moderator

Hi @Tams

Based on your description, it looks like your Switch (ICX7150 Switch) may be booting from the secondary partition ( Note: Secondary partition contains the routing code)  which is causing the bad connectivity issues. This could happen after multiple power outages, please follow up the next guide. 

Once we solve that problem you can upgrade the Switch from the Unleashed site locally.

How to Fix Routing code issues on Lennar Home users via Web GUI.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

 How to Fix Routing code issues on Lennar Home users via CLI

Guide#1 for CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

Guide#2 for CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

Note:  if you have access to the Unleashed Dashboard and the Switch can be seen from there, it may look like the following image, ICX7150-C12-Router instead of ICX7150-C12-Switch, now before starting the steps of the guide, I will advise you to cable the computer directly to the Switch, since you will have a better connectivity than if you connect via wireless. 

  1. After fixing the issue of the Switch booting from the wrong partition, please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community