Link status "connected with warning" message

[dcampen]

I have 2 ports on my ICX7150-C12 Switch that are showing link status "connected with warning" message, how can I find out more about the message and what that means?

[Jayavidhya]

Hi @dcampen 

Thanks for your response,

Please try to reboot the switch by following the below steps and let us know the result.

1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.

2-Please try to press the reset button using a paper click or a small stick 

1.  Remove power from the switch.
2. Press and hold the Reset button while applying power to the switch.
3. After all the system LEDs flash amber, release the Reset button.

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...

Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[dcampen]

 I can supply this info from my admin console

[Jayavidhya]

Hi @dcampen 

Thanks for your response,

To solve this issue we need to replace the ethernet cable with a new one and try connecting to the ports which blinks amber. If the issue persists even after changing the cable then we need to check if there is any mismatch in duplex settings.

Please check whether the ports on the switch is in enabled state or in disabled state.

First try to access the switch CLI by using console connection as mentioned below.

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

Also if you find any difficulties while following the steps please share the screenshot of the error you are getting.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[dcampen]

Here is a picture of the switch: