Thanks for the information provided.
Please follow the below steps to unhide SSID.
We can access to AP GUI, do the following operation to unhide the SSID:
Go to Configuration > Radio 2.4G, find what you want to hide the SSID, click it.
In the Broadcast SSID Section, select Enable.
and then click Update Settings, You can find this SSID is broadcast.
We could also hide or unhide the SSID from the controller CLI using the below set of commands,
ruckus(config)# wlan <WLAN name>
ruckus(config-wlan)# no hide-ssid
The command was executed successfully.
Lennar Home Community