01-09-2023 11:16 AM - edited 01-09-2023 11:54 AM
I am trying to connect to the Ruckus R320 and I do not see the Configure.me or the Lennar wifi networks available to connect to. I have unplugged and replugged in the power box in the laundry room. Two green lights are showing up at the Access Points first one is blinking, second one is solid, no other lights are on.
01-11-2023 05:10 PM - edited 01-11-2023 05:11 PM
ok,do I connect the orange wire from the switch to the Spectrum router I have or where does the orange wire get plugged into from the switch?
I have the blue cord from the AP connected to the switch. When I try to set up unleashed from my phone it says Great! You are connected to Unleashed facgtory Wifi ... then when I hit Start I get pop up message Unable to fetch default configuration from the AP.
I have reset the AP 4 or 5 times.
Thank you for your help.
01-12-2023 07:05 AM
Hi @JenD
Please make sure that the cables are well plug in into the Router to the ICX-7150-C12P
Please check the below guide :
Most common Setups for Lennar homes users
Best Regards
Fernando Vasquez
01-12-2023 12:26 PM
OK, thank you.
Just so I understand, I was hoping to use the Ruckus AP's as my wifi and be able to return my wifi box to my ISP (because they charge me for it) and just keep the modem. It looks like I still need to have a wifi box even if I use the Ruckus AP's, is that correct?
Thank you
01-12-2023 01:02 PM
Hi @JenD
Yes, there must be a modem and a router to connect the ICX 7150-C12p, it must be plugged into one of the twelve ports.
For better understanding of the Lennar setup please follow the below guide.
Best regards,
Jayavidhya
Lennar Home Community
01-16-2023 09:58 AM
So, just so I am clear is the Ruckus just like a wifi booster? It does not replace the wifi box I have from Spectrum?
Thank you.