Lennar ICX 7150-C12P Outage

[sgtjuarez]

I have seen many related posts of people losing internet after a power outage. The response have advanced technical information. I need help to restore my internet step by step from the moment I log into the computer.

Thanks

[Vásquez_Fer]

Hi @renotse 

Hope you are doing well ! 

Is great to hear that you were able to recover you ICX 7150 C12p ! 

You can go ahead and install the lasted version 9010d since you are already running 8090d UFI version.

Our recommendations is to use 8095g firmware version here is the link : 

https://support.ruckuswireless.com/software/3409-ruckus-icx-fastiron-08-0-95g-ga-software-release-zi...

The only file you need is the following shown in the image and marked it as 'yellow'

Best Regards 

Fernando Vasquez 

[renotse]

I am confused by this  detail. I had 2 files to choose from when I reinstalled SPS08090d.bin or SPS08090dufi.bin. I chose SPS08090.bin, but my "show version" output refers to SPS08090d.bin (UFI). 

Please elaborate on my circumstance and the difference in the UFI version, and why my switch reports UFI when I did not install that version