5g green, 2.4g green, Air not lit, CTL green, PWR green. Round status button not lit, stat green, spd faint green; id, usb and Poe not lit.Syst green, PWR green; diag, cld, ms, update are all faint green
Based on your description, it seems that your switch may be booting from the secondary partition ( Note: Secondary partition contains the routing code) which is causing bad connectivity issues. This could happen after multiple power outages, please follow up the next guide.
Note: if you have access to the Unleashed Dashboard and the Switch can be seen from there, it may look like the following image, ICX7150-C12-Router instead of ICX7150-C12-Switch, now before starting the steps of the guide, I will advise you to cable the computer directly to the Switch, since you will have a better connectivity than if you connect via wireless.
How to Fix Routing code issues on Lennar Home users via CLI
After fixing the issue of the Switch booting from the wrong partition, please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive