cancel
Showing results for 
Search instead for 
Did you mean: 

ICX7150 SPS0808D.BIN

Ruckususer1
New Contributor

Hello,

Using Putty Connected manually to the switch It originally showed as SPR and I followed the steps to change it to SPS. I cannot access the  switch via its IP address as I get an error that there is no network connected. My switch does not show on the dashboard. I am having issues keeping devices connected to the internet all my devices randomly drop.

ICX7150 SPS0808D.BIN: I think the switch needs to be upgraded basked on the screen shot showing the version below. All AP'S show updated in the dashboard. How do I upgrade the switch using a WINDOWS pc. I am not technical savy and it took me weeks just to get here.SWITCH.jpg

3 REPLIES 3

Jayavidhya
Moderator
Moderator

Hi @Ruckususer1

Please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

Please follow the below link to perform the upgradation.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community

 

I do not understand what this means. You provided 3 links USB Flash, TFTP AND GUI. How do I know which one to use? Do I have a choice? I looked at all of these steps and all of this is very technical and I do not understand how to follow these links you sent.

I am using a power cycle PC which I using a cord to connect directly to the switch. You said I need to upgrade twice is there something that provides me step by step instructions how to upgrade twice?

You said I am on code 808F where do you see that it says SPS08080D. So would that mean I am on code 808D?

 

Hi @Ruckususer1

Yes, You can upgrade the switch using any of the 3 links USB flash, TFTP and GUI.

In the screenshot you have provided it has been mentioned clearly that your switch is running on code SPS08080D.

To upgrade the code 08095g please follow the below link. You can upgrade the switch by using any of the links.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community