RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
The image of ICX7150-C12 was updated to 08095g from 08090d since the internet connection dropped frequently (ICX7150-C12-Router mode issue).
So, the primary and secondary codes were all updated to SPS08095g.
After this image update, R510 APs are not powered-up.
I found that the POE was not enabled by default and enabled all ports from GUI as shown below. Even after this, APs are not powered up.
Are there additional configuration required?
